Find and manage your missions
English version
The Missions tab collects every mission of the project. From here you follow what is running, resume what you have prepared, and start a new mission.
Open the Missions tab from the side bar on the left.
The Live & Planned tab
The Missions tab has two tabs: Live & Planned, which is where missions are prepared and followed, and Executed, which collects the missions already carried out.
In Live & Planned the missions are grouped by state. Each group shows how many missions it contains and can be collapsed using the arrow next to its name.
| Group | What it contains | What you can do |
| Live Missions | Missions running right now. | Open the mission to follow it and take control of the Mission Unit. |
| Draft | Missions configured and saved, not started yet. A Draft is created as soon as you complete the configuration, and stays available to be reused. | Open the mission to complete or change it, then run the Pre Check and start it. |
| Planned | Missions scheduled to run at a set date and time, once or repeatedly. | Open the mission to change it before it runs. |
Reading the list
Every mission shows its name and the Mission Unit assigned to it. The icon next to the name tells you the type of unit: robot dog, or drone and hangar.
Each group adds the information that matters for that state:
| Group | What is shown |
| Live Missions | For a robot dog, a status chip with what the Mission Unit is doing: On going while the mission is running, RTH while the unit is returning to its Home Position. |
| Draft | Last update, with the date and time of the last change. |
| Planned | The scheduled date, and the time the mission will start. For a repeating mission you also see Next, with the date and time of the following run, and a chip with the number of runs still to come. |
The status chip reports what a robot dog is doing. Missions running with a drone are listed without it: the state of a drone Mission Unit is not reported.
[IMAGE TO BE INSERTED]
What to show: the Missions tab on Live & Planned, with the three groups Live Missions, Draft and Planned open, their counters, the status chips and a repeating mission showing Next and the number of remaining runs.
Find a mission
The search bar filters the list by name. The three groups keep their structure, showing only the missions that match.
When a project holds many missions, collapse the groups you are not working on using the arrow next to the group name, so that the one you need stays in view.
Open a mission
Click a mission to open it. Where you land depends on its state:
- a Draft or a Planned mission opens on the planning screen, where you define Home Position, Waypoints, Danger Zones and Geofencing;
- a Live mission opens on the live view, where you follow it and control the Mission Unit.
Opening a Draft or a Planned mission takes you straight to the planning screen: the configuration you already completed is not asked again. To change it, open the Details tab and select Edit Mission Details.
Save a mission as a draft
On the planning screen, Save as a Draft stores the mission with everything you have defined so far. You can save whenever there is something new to keep; once the mission is saved, there is nothing left to save until you change something again.
If you leave the planning screen with unsaved changes, thea platformconfirmation asksis Leave mission planning?asked before letting you out. Choose Cancel to stay, or Leave anyway to go back to the mission list.go.
ChoosingGoing Leave anywayahead discards the actions configured on the Waypoints that have not been saved. Save the mission as a draft first to keep them.
[IMAGE TO BE INSERTED]
What to show: the Leave mission planning? dialog over the planning screen, with Cancel and Leave anyway, and Save as a Draft visible at the bottom of the panel.
Delete a mission
Deleting a mission removes it from the project together with everything defined on it. The platformconfirmation asks for a confirmation, showingsays how many missionsoccurrences are about to be deleted.
Deletion is permanent and cannot be undone.
[IMAGE TO BE INSERTED]
What to show: the Delete Missions? confirmation dialog, with the count of the selected missions and the Cancel and Delete buttons.
Start a new mission
The New Mission button, at the top of the Live & Planned tab, opens the configuration of a new mission.
A Mission Unit and an Equipment must be registered before a mission can be created. If either is missing, a message explains what to register.
Links
- Create a mission: configure a new mission step by step.
- Draw the mission on the map: what you can do on the planning screen.
- Robot Dog – Tracking a live mission: following a mission that is running.
- Review an executed mission: what a mission left behind once it is over.
- Missions calendar: the same missions on a calendar.
- Initial Setup: register Mission Units, Add-ons and Equipment.
Italian version
Il tab Missions raccoglie tutte le missioni del progetto. Da qui segui quelle in corso, riprendi quelle che hai preparato e ne avvii di nuove.
Apri il tab Missions dalla barra laterale a sinistra.
Il tab Live & Planned
Missions si divide in due tab: Live & Planned, dove le missioni si preparano e si seguono, ed Executed, che raccoglie quelle già eseguite.
In Live & Planned le missioni sono raggruppate per stato. Ogni gruppo indica quante missioni contiene e si comprime con la freccia accanto al nome.
| Gruppo | Cosa contiene | Cosa puoi fare |
| Live Missions | Le missioni in esecuzione in questo momento. | Aprire la missione per seguirla e intervenire sulla Mission Unit. |
| Draft | Le missioni configurate e salvate, non ancora avviate. Una Draft viene creata appena completi la configurazione e resta disponibile per essere ripresa. | Aprire la missione per completarla o modificarla, poi eseguire il Pre Check e avviarla. |
| Planned | Le missioni pianificate per una data e un'ora, una sola volta oppure a ripetizione. | Aprire la missione per modificarla prima che venga eseguita. |
Leggere l'elenco
Ogni missione mostra il nome e la Mission Unit assegnata. L'icona accanto al nome indica il tipo di unità: robot dog, oppure drone e hangar.
Ogni gruppo riporta l'informazione più utile per quello stato:
| Gruppo | Cosa viene mostrato |
| Live Missions | Per un robot dog, un chip che indica cosa sta facendo la Mission Unit: On going mentre la missione è in corso, RTH mentre l'unità sta rientrando alla Home Position. |
| Draft | Last update, con data e ora dell'ultima modifica. |
| Planned | La data pianificata e l'ora di avvio. Se la missione si ripete, compare anche la voce Next, con la data e l'ora dell'esecuzione più imminente, e un chip che indica quante esecuzioni restano. |
Il chip di stato riguarda soltanto il robot dog: per una missione in corso con un drone non compare, perché lo stato di una Mission Unit di tipo drone non viene riportato.
[IMMAGINE DA INSERIRE]
Cosa mostrare: il tab Missions su Live & Planned, con i tre gruppi Live Missions, Draft e Planned aperti, i contatori, i chip di stato e una missione ripetuta con Next e il numero di esecuzioni rimanenti.
Trovare una missione
La barra di ricerca filtra l'elenco per nome: i tre gruppi restano al loro posto e mostrano solo le missioni che corrispondono.
Se un progetto contiene molte missioni, comprimi con la freccia i gruppi su cui non stai lavorando, così resta in vista solo quello che ti serve.
Aprire una missione
Clicca una missione per aprirla: la schermata su cui arrivi dipende dal suo stato:
- una missione Draft o Planned si apre sulla schermata di pianificazione, dove definisci Home Position, Waypoints, Danger Zones e Geofencing;
- una missione Live si apre sulla vista in diretta, dove la segui e comandi la Mission Unit.
Aprendo una missione Draft o Planned arrivi direttamente alla schermata di pianificazione: la configurazione che hai già completato non viene richiesta di nuovo. Per modificarla, apri il tab Details e seleziona Edit Mission Details.
Salvare una missione come bozza
Nella schermata di pianificazione, Save as a Draft salva la missione con tutto ciò che hai definito fino a quel momento. Puoi salvare ogni volta che c'è qualcosa di nuovo; una volta salvata la missione, non resta nulla da salvare finché non la modifichi.
Se esci dalla schermata di pianificazione con modifiche non salvate,salvate lati piattaformaviene chiedechiesta conferma con Leave mission planning?. Scegli Cancel per restare, oppure Leave anyway per tornare all'elenco delle missioni.conferma.
Con Leave anywayProseguendo, le azioni configurate sui Waypoints e non salvate vengono perse: salva la missione come bozza per conservarle.
[IMMAGINE DA INSERIRE]
Cosa mostrare: il dialog Leave mission planning? sopra la schermata di pianificazione, con Cancel e Leave anyway, e Save as a Draft visibile in fondo al pannello.
Eliminare una missione
Eliminando una missione, dal progetto vengono rimossi anche tutti gli elementi definiti al suo interno. La piattaforma chiede conferma e indica quante missionioccorrenze staiverranno per eliminare.eliminate.
L'eliminazione è permanente e non può essere annullata.
[IMMAGINE DA INSERIRE]
Cosa mostrare: il dialog di conferma Delete Missions?, con il conteggio delle missioni selezionate e i pulsanti Cancel e Delete.
Avviare una nuova missione
Il pulsante New Mission, in alto nel tab Live & Planned, apre la configurazione di una nuova missione.
Per creare una missione servono almeno una Mission Unit e un Equipment già censiti. Se manca uno dei due, un messaggio indica cosa censire.
Collegamenti
- Creare una missione: configurare una nuova missione passo per passo.
- Disegnare la missione in mappa: cosa puoi fare nella schermata di pianificazione.
- Robot Dog – Seguire una missione in diretta: seguire una missione in corso.
- Consultare una missione eseguita: cosa lascia una missione una volta conclusa.
- Calendario delle missioni: le stesse missioni su un calendario.
- Configurazione iniziale: censire Mission Unit, Add-on ed Equipment.
Last update: 31 July 2026