Skip to main content

Create and manage Automations


Automations allow the platform to respond automatically to incoming events, executing one or more actions in sequence, from reportsending generationnotifications to users to creating or updating objects on the launch of robotic missions.platform.

Available only to users with backoffice-admin permission.


Create a new automation

1. Log in to the Backoffice and open the Automations section from the side menu.

automation section button.pngautomation section button.png

2. Click New Automation in the upper-right corner.

new automation button.pngnew automation button.png

3. Enter the name of the automation in the page header. This field is required.

4. Select the groups to associate with the automation using the multi-search field. Groups define the visibility of the automation in the app.

5.  Set the status of the automation status using the toggleswitch at the top. ItBy default, it is enabled.
If the status is disabled, the configuration sections are locked.

New automations are active by default.
When the automation is inactive, the configuration cannot be edited.

configuration header.pngconfiguration header.png

The page is divided into two areas:

  • On the left is the flow summary, with the trigger card and the cards for any added actions
  • On the right is the configuration panel for the selected section

Automation Timeline and configuration.pngAutomations 1.png


The trigger and action cards display their status via an icon: an exclamation mark on a yellow background (Pending) indicates a configuration that is incomplete or not yet confirmed, while a checkmark on a green background (Completed) indicates a complete and confirmed configuration.

The page has two distinct save levels. The Apply button confirms the configuration of the individual section and updates the card status. The Save button in the upper-right corner saves the entire automation definitively.

6. Configure the trigger ↓↓ to define when the automation should run.

7. Add and configure actions ↓↓ to choose what the platform should do when the trigger fires.

8. Save the automation by clicking Save in the upper-right corner of the page.
The button is enabled only when the name, groups, trigger, and all configured actions are correctly set up and confirmed.

💡 Tip: Before saving, make sure all cards are in the Completed state.state, Aso card in the Pending state preventsthat the automation fromis beingsaved saved.with a complete and consistent configuration.


Configure the trigger

The trigger defines when the automation should run.

It is the first section to complete: until the trigger is configured and confirmed, the button to add actions is not available.

Automation 3.png

1. Select the linked event from the dropdown menu. The list shows all events configured for the organization.
Events already associated with another automation are not available.

2. If you want the automation to runactivate only inwhen certain cases, add one or more conditions. Conditions are optional: if you add none, the automation fires every time the event is received.

Choose the type of condition to use:

    Event field conditions compare the values of the fields of the received event, for example a severity level or a numeric value. Geospatial conditions check whether the position sent with the event falls inside one or more geographic areas (geofences).

    Configuration Panel.png

    Geospatial conditions are available only if the linked event has geographic coordinates configured.

    The two types cannot be combined in the same trigger: after the first condition, you can only add conditions of the same type. To switch to the other type, first remove all the conditions, one by one or with the Clear all button in the upper-right corner of the Conditions area.

    3. Click Apply to confirm the trigger and move on to adding actions. If a condition shows an error, fix it before confirming.

    If you later change the linked event, all configuredspecific conditions are removed.met Youclick can restore the previous configuration viaon DiscardAdd changescondition..


    In

    Eventthis fieldcase, conditions

    Forfor each condition,condition you will need to fill in three required fields:

    • Field
      Select one of the fields mapped in the event. Each field is accompanied by an icon indicating the data type (text, number, date, boolean).

    • Condition
      Select the condition, for example equal to, greater than, less than, etc. The list of conditions depends on the data type.

    • Value
      Enter the comparison value

    conditions.pngconditions.png

    Conditions are organized in groups, so youYou can combine OR and AND logic:

      Click OR if to add a condition to the same group. A group is satisfied when at least one of itsmore conditions is true. Click AND continue if to open a new group. The trigger fires only when all groups are satisfied.

      With two groups, for example, the rule becomes: (condition A or condition B) and (condition C or condition D).

      Configuration Panel.png

      Geospatial conditions

      A geospatial condition checks whetherusing the pointAdd condition sentbutton.
      If withmultiple conditions are present, all of them must be satisfied simultaneously to activate the event,trigger.

      for

      If exampleyou don't add any conditions, the positionautomation offires aevery wearabletime sensorthe or a tracker,event is inside a geographic areareceived (geofence). The area is an object of type Polygon already present in the project, for example a hazardous zone of a construction site.

      Configuration Panel.png

      1. The position is read automatically from the coordinates configured in the linked event: the Position from event section reminds you of this and requires no input.

      2. If needed, set the tolerance margin in metres. The default is 0, meaning the exact boundary of the area. A margin greater than zero prevents small GPS oscillations near the boundary from being read as entries or exits.

      3. InClick Apply to confirm the trigger. The card will move to the GeofenceCompleted section,state paste intoand the Instancebutton IDto fieldadd actions will become available.

      If you later change the identifierlinked ofevent, all already configured conditions will be reset. You can undo the Polygonchange object,via copiedDiscard fromchanges to restore the project.previous The Related Object Class field is filled in automatically.configuration.

      4. To monitor several areas with the same automation, click OR if and configure another geospatial condition. Geospatial conditions are combined only with OR: the automation fires when the point enters at least one of the configured areas.

      The automation runs each time the point enters the area, not while it stays inside. How quickly an entry is detected depends on how often the sensor sends its position.


      Add and configure actions

      Once the trigger is confirmed, click Add action to choose the type of action to execute. The available actions depend on the entity the event selected in the trigger is linked to.

      select action.pngAutomations 2.png

      The available action types are:

      Object class operation ↓↓
      Creates or updates an instance of an existing object class.

      Start mission ↓
      Automatically starts a mission for a drone or a robot dog.

      Once the type is selected, the configuration panel opens on the right. The configuration is structured in progressive steps: each step unlocks only after the previous one has been completed and confirmed via the Continue button.

      When you have finished configuring the action, click Apply to add it to the flow. The action card will appear in the left column with a summary of the main settings.

      For each action you must also define the error behavior, choosing whether the system should continue with the next action or stop the entire automation.

      error behavior.pngerror behavior.png

      You can add an unlimited number of actions.
      To change the execution order, drag the cards up or down in the left column. The order in which the cards appear corresponds to the actual execution order.

      💡 Tips:

      • If the actions are independent of each other, choose to continue with the next action to prevent a single issue from blocking the entire flow
      • If the actions are chained and depend on one another, choose to stop the automation to avoid inconsistent partial executions

      Send notification

      Configure the automatic sending of an email or push notification.

      1. Select the notification type: Email or Push. Each action handles a single channel. To send both email and push, add two separate actions.

      Notification type selection.pngNotification type selection.png

      2. Click Continue to access the Recipients section.

      3. You can add optional conditions to limit delivery to specific occurrences of the event, filtering by severity level (info, warning, success, error) or by specific event name.

      4. Add the recipients by selecting users or groups. For email notifications you can also add external email addresses.

      recipients panel.pngrecipients panel.png

      5. Click Apply to confirm.

      Generate report

      Configure the automatic generation of a report.

      1. Select the report template from the dropdown menu. The list shows the templates available in the Reports section of the Backoffice.

      report template selection.png

      2. Click Continue to access the Parameters mapping section.

      3. Choose how to populate each template parameter: with the event field, where the value is read from a field of the received event that you will select from a dropdown menu, or with a static value, by entering a fixed value manually.

      parameters mapping.png

      Required parameters are marked with an asterisk and must all be populated. A counter updated in real time showing the missing parameters is displayed at the top. A search bar allows you to filter the parameter list.

      4. Click Apply to confirm.

      If you change the report template, the parameter configuration will be reset because the available parameters depend on the selected template.

      Object class operation

      Configure the automatic creation or update of an object class instance.

      1. Select the object class from the dropdown menu.

      2. Select the operation to perform:

      • Create object
        Creates a new instance of the class. Available for classes of type Point and Form.

      • Modify object
        Updates an existing instance. Available for all class types.

      object class selection.pngobject class selection.png

      The Point creation action is only available if the linked event has a coordinates field correctly configured.

      3. Click Continue to access the Attributes mapping section.

      4. Choose how to populate each class attribute: with the event field, where the value is read from a field of the received event that you will select from a dropdown menu, or with a static value, by entering a fixed value manually.

      attribute mapping.pngattribute mapping.png

      Required attributes are marked with an asterisk and must all be populated. A counter updated in real time showing the missing attributes is displayed at the top. A search bar allows you to filter the attribute list.

      For classes of type Point, the Coordinates field is managed automatically: during creation it is populated from the coordinates field configured in the event and cannot be edited manually. During a modification it is optional.

      For the Modify object operation, the Unique identifier field is required to indicate which instance to update. It can be mapped from an event field or entered as a static value.

      5. Click Apply to confirm.

       If you change the object class, the attribute mapping will be reset and the selected operation will be invalidated.

      Start mission

      Configure the automatic launch of a robotic mission.

      This action is only available if the linked event has a coordinates field correctly configured.

      1. Select the unit type: Robot Dog or Drone.

      2. Select the specific unit. For a drone, you must also select the associated hangar: the drone + hangar pair is treated as the unique reference for the action.

      mission unit selection.png

      3. Click Continue to access the Mission setup section. The fields to fill in vary depending on the selected unit.

      For Robot Dog:

        Mission name Mission type Profile Mission map, selectable via the Browse map button, which opens a viewer where you can search, select, and preview the maps available for the organization. Only outdoor maps are shown Notes (optional)

        For Drone:

          Mission name Take-off safety height Take-off speed Global height Global speed Profile Notes (optional)

          mission setup.png

          4. Click Continue to access the Waypoint actions section. The waypoint coordinates are populated automatically from the coordinates field configured in the event and cannot be edited manually.

          Using the Add action button you can configure one or more actions for the unit to perform at the target point. The available actions depend on the selected profile and the add-ons associated with the unit.

          waypoints actions.png

          5. Before you can confirm, you must read and explicitly select all the operational disclaimers shown at the bottom of the section. These notices concern the responsibilities related to the automatic execution of the mission and the option to force the launch even in the presence of warnings detected during the pre-check.

          6. Click Apply to confirm.

           You can add multiple start mission actions within the same automation, provided they do not reference the same unit.
          For drones, the same drone + hangar pair cannot be used more than once.

           If the unit is busy with another mission at the time of execution, the action is interrupted.
          No override mechanism for the ongoing mission is available.


          View and manage automations

          The list shows all configured automations with the following information:

          • Name of the automation
          • Status active or inactive, shown via icon
          • Actions total number of configured actions; hovering over the number shows the list in execution order
          • Creation date

          The list can be viewed in table, grid, or list mode.

          Two warning states may appear in the list:

          • Warning icon next to the name
            The automation is saved but has no actions configured yet.

          • Alert icon next to the name
            The event linked to the trigger has been deleted. The automation is automatically deactivated and cannot run until a new valid event is selected.

          automation section.pngautomation section.png

          To edit an automation, click the blue button with the arrow icon that appears when hovering over the item.

          When you edit a section, the related card returns to the Pending state. You can confirm the changes via Apply or discard them via Discard changes, which restores the last saved configuration.

          If you edit a field that affects subsequent configurations, such as the unit type in a mission or the object class in an operation, the dependent steps are automatically reset and must be reconfigured. If you change the linked event of the trigger, all conditions are removed after your confirmation.

          You can also change the action order by dragging the cards, and add or remove individual actions.

          Changes are not final until the automation is saved.


          Delete an automation

          From the main list, select one or more automations and click the Delete button. The system shows a confirmation dialog with the names of the selected automations and a warning that all actions configured within them will stop running.

          Hold CTRL and click to add automations to the selection or remove them from it.

          Deleting an automation permanently removes the trigger, all conditions, and all actions configured within it. This action cannot be undone.


          What happens when the linked event is deleted

          If an event used by an automation is deleted, the system flags this before proceeding with the deletion, indicating that the affected automation will be deactivated.

          delete event modal.png

          If the deletion is confirmed, the automation is automatically set to inactive and the trigger is considered unconfigured. The alert icon appears next to the name in the list.

          To restore the automation, open it, activate it using the status toggle, and select a new valid event in the trigger. Events that are not compatible with the already configured actions are disabled in the dropdown menu.

          event selection pt 2.png


          Links

          CreareCrea e gestiregestisci le Automazioniautomazioni


          Le automazioni consentono alla piattaforma di rispondere automaticamente alla ricezione di un evento, eseguendo una o piùpiù azioni in sequenza, dalla generazionedall'invio di reportnotifiche agli utenti alla creazione o all'avvioaggiornamento di missionioggetti robotiche.sulla piattaforma.

          Disponibile solo per utenti con permesso backoffice-admin.


          Creare una nuova automazione

          1. Accedi al Backoffice e apri la sezione Automazioni dal menu laterale.

          automation section button.pngautomation section button.png

          2. Clicca su Nuova automazione in alto a destra.

          new automation button.pngnew automation button.png

          3. Inserisci il nome dell'automazione nell'intestazione della pagina. Il campo èè obbligatorio.

          4. Seleziona i gruppi a cui associare l'automazione tramite il campo di ricerca multipla. I gruppi definiscono la visibilitàvisibilità dell'automazione nell'app.

          5. Imposta lo stato dell'automazione tramite l'interruttore in alto. Di default èè attivo.
          QuandoSe l'automazionelo èstato disattivata,è nondisattivo, èle possibilesezioni modificaredi laconfigurazione configurazione.risultano bloccate.

          configuration header.pngconfiguration header.png

          La pagina èè divisa in due aree:

          • A sinistra si trova il riepilogo del flusso, con la scheda del trigger e le schede delle azioni aggiunte
          • A destra si trova il pannello di configurazione della sezione selezionata

          Automation Timeline and configuration.pngAutomations 1.png


          Le schede del trigger e delle azioni mostrano il loro stato tramite un'icona,icona: il punto esclamativo su sfondo giallo (In attesa) rappresenta una configurazione incompleta o non ancora confermata, mentre la spunta su sfondo verde (Completato) rappresenta una configurazione completa e confermata.

          All'interno della pagina sono presenti due livelli di salvataggio distinti. Il pulsante Applica conferma la configurazione della singola sezione e aggiorna lo stato della scheda. Il pulsante Salva in alto a destra salva l'intera automazione in modo definitivo. 

          6. Configura il trigger ↓↓ per stabilire quando l'automazione dovràdovrà essere eseguita.

          7. Aggiungi e configura le azioni ↓↓ per scegliere cosa la piattaforma dovràdovrà fare a seguito del trigger.

          8. Salva l'automazione cliccando Salva in alto a destra della pagina.
           Il pulsante è abilitato solo quando nome, gruppi, trigger e tutte le azioni presenti sono correttamente configurati e confermati.

          💡 Suggerimento: Prima di salvare, verifica che tutte le schede siano nello stato Completato. Una scheda in stato In attesa impedisce il salvataggio dell'automazione.


          Configurare il trigger

          Il trigger definisce quando l'automazione deve essere eseguita.

          ÈÈ la prima sezione da completare: finchéfinché il trigger non èè configurato e confermato, il pulsante per aggiungere azioni non èè disponibile.

          Automation 3.png

          1. Seleziona l'evento collegato dal menu a tendina. La lista mostra tutti gli eventi configurati per l'organizzazione.
          Gli eventi giàgià associati a un'altra automazione non sono disponibili.

          2. Se vuoi che l’automazione venga eseguita solo in determinati casi, aggiungi una o più condizioni. Le condizioni sono facoltative: se non ne imposti nessuna, l’l'automazione si attivaattivi ognisolo voltaal che viene ricevuto l’evento.

          Scegli il tipoverificarsi di condizione da utilizzare:

            Condizioni sui campi dell’evento: confrontano i valori dei campi dell’evento ricevuto, ad esempio il livello di gravità o un valore numerico. Condizioni geospaziali: verificano se la posizione associata all’evento ricade all’interno di una o più aree geografiche (geofence).

            Configuration Panel.png

            Le condizioni geospazialispecifiche sono disponibili solo se l’evento collegato ha le coordinate geografiche configurate.

            I due tipi di condizione non possono essere combinati nello stesso trigger: dopo aver aggiunto la prima condizione, puoi aggiungerne solo altre dello stesso tipo. Per passare all’altro tipo, rimuovi prima tutte le condizioni, una alla volta oppure utilizzando il pulsante Cancella tutto nell’angolo in alto a destra della sezione Conditions.

            3. Fai clicclicca su ApplicaAggiungi condizione.
            In questo caso, per confermare la configurazione del trigger e passare all’aggiunta delle azioni. Se una condizione presenta un errore, correggilo prima di confermare.

            Se in seguito modifichi l’evento collegato, tutte le condizioni configurate verranno rimosse. Puoi ripristinare la configurazione precedente tramite Scarta modifiche.

            Condizioni sui campi dell’evento

            Per ogni condizione, compiladovrai icompilare tre campi obbligatori:

            • Campo
              Seleziona uno dei campi mappati nell'evento. Ogni campo èè accompagnato da un'icona che indica il tipo di dato (testo, numero, data, booleano).

            • Condizione
              Seleziona la condizione, per esempio uguale, maggiore, minore, ecc. La lista delle condizioni dipende dal tipo di dato.

            • Valore
              Inserisci il valore di confronto

            conditions.pngconditions.png

            LePuoi aggiungere più condizioni tramite il pulsante Aggiungi condizione.
            Se sono organizzatepresenti inpiù condizioni, per attivare il trigger devono essere tutte soddisfatte contemporaneamente.

            Se non aggiungi condizioni, l'automazione si avvia gruppi,ogni volta che consentono di combinare la logica OR e AND:

              Fai clic su Oppure per aggiungere una condizione allo stesso gruppo. Un gruppo è soddisfatto quando almeno una delle sue condizioni è vera. Fai clic su E continua se per creare un nuovo gruppo. Il trigger si attiva solo quando tutti i gruppi sono soddisfatti.

              Ad esempio, con due gruppi, la regola diventa: (condizione A oppure condizione B) e (condizione C oppure condizione D).

              Configuration Panel 2.png

              Condizioni geospaziali

              Una condizione geospaziale verifica se il punto associato all’evento, ad esempio la posizione di un sensore indossabile o di un tracker, si trova all’interno di un’area geografica (geofence). L’area corrisponde a un oggetto di tipo Polygon già presente nel progetto, ad esempio una zona pericolosa all’interno di un cantiere.

              [IMMAGINE DA INSERIRE: 3 - geospatial-condition.png]
              Cosa mostrare: una condizione Point is inside the geofence con il riquadro Position from event, il margine di tolleranza, un Instance ID valido e il campo Related Object Class con il nome della classe e la spunta verde.
              Dove: pannello di configurazione del trigger, sezione Conditions.

              1. La posizionel'evento viene ricavata automaticamente dalle coordinate configurate nell’evento collegato. La sezione Position from eventricevuto ti ricorda questa impostazione e non richiede alcun intervento.

              2. Se necessario, imposta il margine di tolleranza in metri. Il valore predefinito è 0, corrispondente al confine esatto dell’area. Un margine maggiore di zero evita che piccole oscillazioni del GPS in prossimità del confine vengano interpretate come ingressi o uscite..

              3. Nella sezioneClicca GeofenceApplica, inserisciper nelconfermare campoil trigger. La scheda passerà allo stato Instance ID l’identificativo dell’oggetto Polygon, copiato dal progetto. Il campo Related Object Class viene compilato automaticamente.

              4. Per monitorare più aree con la stessa automazione, fai clic su OppureCompletato e configurasi un’altraabiliterà condizioneil geospaziale.pulsante Leper aggiungere azioni.

              Se in seguito modifichi l'evento collegato, tutte le condizioni geospazialigià possonoconfigurate esserevengono combinateazzerate. soloPuoi con OR: l’automazione si attiva quando il punto entra in almeno una delle aree configurate.

              [IMMAGINE DA INSERIRE: 4 - geospatial-conditions-multiple.png]
              Cosa mostrare: due condizioni Point is inside the geofence separate da Oppure,annullare la secondamodifica ancora vuota contramite Auto-filledScarta by IDmodifiche nelper camporipristinare Related Object Class.
              Dove: pannello dila configurazione del trigger, sezione Conditions.precedente.

              L’automazione viene eseguita ogni volta che il punto entra nell’area, non durante la permanenza al suo interno. La rapidità con cui viene rilevato l’ingresso dipende dalla frequenza con cui il sensore invia la propria posizione.


              Aggiungere e configurare le azioni

              Dopo aver confermato il trigger, clicca su Aggiungi azione per scegliere il tipo di azione da eseguire. Le azioni disponibili dipendono dall'entitàentità a cui èè collegato l'evento selezionato nel trigger.

              select action.pngAutomations 2.png

              Se l'evento èè collegato a un progetto, un oggetto o un sensore, sono disponibili tutti i tipi di azione.
              Se l'evento èè collegato a un'organizzazione o a un dispositivo, èè disponibile solo l'invio di notifiche.

              I tipi di azione disponibili sono:

              Operazione su classe oggetto ↓↓
              Crea o modifica un'istanza di una classe oggetto esistente.

              Avvia missione ↓
              Avvia automaticamente una missione per un drone o un robot dog

              Una volta selezionato il tipo, il pannello di configurazione si apre a destra. La configurazione èè strutturata in step progressivi: ogni step successivo si sblocca solo dopo aver completato e confermato il precedente tramite il pulsante Continua.

              Quando hai terminato la configurazione dell'azione, clicca Applica per aggiungerla al flusso.
              La scheda dell'azione appariràapparirà nella colonna di sinistra con un riepilogo delle impostazioni principali.

              Per ogni azione devi anche definire il comportamento in caso di errore, scegliendo se il sistema deve continuare con l'azione successiva oppure interrompere l'intera automazione.

              error behavior.pngerror behavior.png

              Puoi aggiungere un numero illimitato di azioni.
              Per cambiare l'ordine di esecuzione, trascina le schede verso l'alto o verso il basso nella colonna di sinistra. L'ordine in cui le schede compaiono corrisponde all'ordine effettivo di esecuzione.

              💡 Suggerimenti:

              • Se le azioni sono indipendenti tra loro, scegli di continuare con l'azione successiva per evitare che un singolo problema blocchi l'intero flusso
              • Se le azioni sono concatenate e dipendono l'una dall'altra, scegli di interrompere l'automazione per evitare esecuzioni parziali incoerenti

              Invia notifica

              Configura l'invio automatico di una notifica email o push.

              1. Seleziona il tipo di notifica: Email o Push. Ogni azione gestisce un solo canale. Per inviare sia email che push, aggiungi due azioni separate.

              Notification type selection.pngNotification type selection.png

              2. Clicca Continua per accedere alla sezione Destinatari.

              3. Puoi aggiungere condizioni opzionali per limitare l'invio solo ad alcune occorrenze dell'evento, filtrandole per livello di severitàseverità (info, avviso, successo, errore) o per nome evento specifico.

              4. Aggiungi i destinatari selezionando utenti o gruppi. Per le notifiche email puoi aggiungere anche indirizzi email esterni.

              recipients panel.pngrecipients panel.png

              5. Clicca Applica per confermare.

              Genera report

              Configura la generazione automatica di un report.

              1. Seleziona il template di report dal menu a tendina. La lista mostra i template disponibili nella sezione Report del Backoffice.

              report template selection.png

              2. Clicca Continua per accedere alla sezione Mappatura parametri.

              3. Scegli come popolare ogni parametro del template, se con il campo dell'evento, il valore viene letto da un campo dell'evento ricevuto che dovrai selezionare da un menu a tendina, oppure con un valore statico, inserendo manualmente un valore fisso.

              parameters mapping.png

              I parametri obbligatori sono contrassegnati da un asterisco e devono essere tutti popolati. In alto viene mostrato un contatore aggiornato in tempo reale con i parametri mancanti. Una barra di ricerca consente di filtrare la lista dei parametri.

              4. Clicca Applica per confermare.

               Se modifichi il template di report, la configurazione dei parametri viene azzerata perché i parametri disponibili dipendono dal template selezionato.

              Operazione su classe oggetto

              Configura la creazione o la modifica automatica di un'istanza di una classe oggetto.

              1. Seleziona la classe oggetto interessata dal menu a tendina.

              2. Seleziona l'operazione da eseguire tra:

              • Crea oggetto
                Crea una nuova istanza della classe. Disponibile per classi di tipo Punto e Form.

              • Modifica oggetto
                Aggiorna un'istanza esistente. Disponibile per tutti i tipi di classe.

              object class selection.pngobject class selection.png

              L'azione di creazione di un Punto èè disponibile solo se l'evento collegato ha un campo coordinate correttamente configurato.

              3. Clicca Continua per accedere alla sezione Mappatura attributi.

              4. Scegli come popolare ogni attributo della classe, se con il campo dell'evento, il valore viene letto da un campo dell'evento ricevuto che dovrai selezionare da un menu a tendina, oppure con un valore statico, inserendo manualmente un valore fisso.

              attribute mapping.pngattribute mapping.png

              Gli attributi obbligatori sono contrassegnati da un asterisco e devono essere tutti popolati. In alto viene mostrato un contatore aggiornato in tempo reale con gli attributi mancanti. Una barra di ricerca consente di filtrare la lista degli attributi.

              Per le classi di tipo Punto, il campo Coordinate èè gestito automaticamente: in fase di creazione viene popolato a partire dal campo coordinate configurato nell'evento e non èè modificabile manualmente. In fase di modifica èè opzionale.

              Per l'operazione Modifica oggetto èè obbligatorio configurare il campo Identificatore univoco, che indica quale istanza aggiornare. PuòPuò essere mappato da un campo evento o inserito come valore statico.

              5. Clicca Applica per confermare.

              Se modifichi la classe oggetto, la mappatura degli attributi viene azzerata e l'operazione selezionata viene invalidata.

              Avvia missione

              Configura l'avvio automatico di una missione robotica.

              Questa azione è disponibile solo se l'evento collegato ha un campo coordinate correttamente configurato.

              1. Seleziona il tipo di unità tra Robot Dog e Drone.

              2. Seleziona l'unità specifica. Nel caso di un drone, devi selezionare anche l'hangar associato: la coppia drone + hangar viene trattata come riferimento unico dell'azione.

              mission unit selection.png

              3. Clicca Continua per accedere alla sezione Configurazione missione.
              I campi da compilare variano in base all'unità selezionata.

              Per Robot Dog:

                Nome della missione Tipologia missione Profilo Mappa missione, selezionabile tramite il pulsante Sfoglia mappa, che apre un visualizzatore dove puoi cercare, selezionare e visualizzare in anteprima le mappe disponibili per l'organizzazione. Sono mostrate solo le mappe di tipo outdoor Note (opzionale)

                Per Drone:

                  Nome della missione Altezza di sicurezza al decollo Velocità di decollo Altezza globale Velocità globale Profilo Note (opzionale)

                  mission setup.png

                  4. Clicca Continua per accedere alla sezione Azioni sul waypoint.
                  Le coordinate del waypoint vengono popolate automaticamente a partire dal campo coordinate configurato nell'evento e non sono modificabili manualmente.

                  Tramite il pulsante Aggiungi azione puoi configurare una o più azioni che l'unità deve eseguire sul punto target. Le azioni disponibili dipendono dal profilo selezionato e dagli add-on associati all'unità.

                  waypoints actions.png

                  5. Prima di poter confermare, devi leggere e selezionare esplicitamente tutti i disclaimer operativi mostrati in fondo alla sezione. Questi avvisi riguardano le responsabilità legate all'esecuzione automatica della missione e la possibilità di forzare l'avvio anche in presenza di avvisi rilevati durante il pre-controllo.

                  6. Clicca Applica per confermare.

                  Puoi aggiungere più azioni di avvio missione nella stessa automazione, a condizione che non facciano riferimento alla stessa unità. Per i droni, la stessa coppia drone + hangar non può essere usata più di una volta.

                  Se al momento dell'esecuzione l'unità è occupata in un'altra missione, l'azione viene interrotta.
                  Non è previsto alcun meccanismo di override della missione in corso.


                  Visualizzare e modificare le automazioni

                  La lista mostra tutte le automazioni configurate con le seguenti informazioni:

                  • Nome dell'automazione
                  • Stato attivo o disattivo, mostrato tramite icona
                  • Azioni numero totale di azioni configurate; passando il mouse sul numero, viene mostrato l'elenco in ordine di esecuzione
                  • Data di creazione

                  La lista puòpuò essere visualizzata in modalitàmodalità tabella, griglia o elenco.

                  Nella lista possono comparire due stati di attenzione:

                  • Icona di avviso accanto al nome
                    L'automazione èè salvata ma non ha ancora azioni configurate.

                  • Icona di allerta accanto al nome
                    L'evento collegato al trigger èè stato eliminato. L'automazione viene automaticamente disattivata e non puòpuò essere eseguita finchéfinché non viene selezionato un nuovo evento valido.

                  automation section.pngautomation section.png

                  Per modificare un'automazione, clicca sul pulsante blu con l'icona freccia che appare al passaggio del mouse sull'elemento.

                  Quando modifichi una sezione, la relativa scheda torna allo stato In attesa. Puoi confermare le modifiche tramite Applica oppure annullarle tramite Scarta modifiche, che ripristina l'ultima configurazione salvata.

                  Se modifichi un campo che ha impatto su configurazioni successive, ad esempio il tipo di unitàunità in una missione o la classe oggetto in un'operazione, gli step dipendenti vengono automaticamente azzerati e devono essere riconfigurati. Se modifichi l’evento collegato al trigger, tutte le condizioni vengono rimosse dopo la tua conferma.

                  Puoi anche modificare l'ordine delle azioni trascinando le schede, e aggiungere o rimuovere azioni singole.

                  Le modifiche non sono definitive fino al salvataggio dell'automazione.


                  Eliminare un'automazione

                  Dalla lista principale, seleziona una o piùpiù automazioni e clicca sul pulsante Elimina. Il sistema mostra una finestra di conferma con il nome delle automazioni selezionate e un avviso che tutte le azioni configurate al loro interno cesseranno di essere eseguite.

                  Tieni premuto CTRL e clicca per aggiungere automazioni alla selezione o toglierle.

                  Eliminando un'automazione vengono rimossi definitivamente anche il trigger, tutte le condizioni e tutte le azioni configurate al suo interno. L'operazione èè irreversibile.


                  Cosa succede quando l'evento collegato viene eliminato

                  Se un evento utilizzato da un'automazione viene eliminato, il sistema lo segnala prima di procedere con la cancellazione, indicando che l'automazione coinvolta verrà disattivata.

                  delete event modal.png

                  Se si conferma l'eliminazione, l'automazione passa automaticamente allo stato disattivo e il trigger risulta non configurato. Nella lista compare l'icona di allerta accanto al nome.

                  Per ripristinare l'automazione, aprila, attivala tramite l'interruttore di stato e seleziona un nuovo evento valido nel trigger. Gli eventi non compatibili con le azioni già configurate risultano disabilitati nel menu a tendina.

                  event selection pt 2.png


                  Collegamenti

                  Last update: 2717 OctoberAug 2026



                  Revision #19
                  Created 7 May 2026 15:53:51 by EagleArca Wiki
                  Updated 5 June 2026 13:15:27 by EagleArca Wiki